BostonGolf Simulators
Close-up of a golf club and ball on turf

Golf Simulator Installation Services We Design, Install and Service Your Simulator

Design, installation, calibration, training and ongoing service from one team. When the project needs construction or HVAC work, we coordinate those trades for you.

Overview

Golf Simulator Installation From Start to Finish

Most people who call us have already looked at launch monitors online. The hard part is everything around the launch monitor: whether the room is big enough, which screen and projector to pair with it, how to light the room so the picture stays bright, and who wires it all together. That is the work we do.

We are an independent dealer for Golfzon, TrackMan, Foresight Sports, Full Swing and SkyTrak, so we recommend the system that fits your room and the way you play. We install simulators in homes, in clubs, bars and offices, and as fold-away Murphy systems for rooms that have to do two jobs.

Design and Engineering

Every project starts with a design consultation. We laser-measure the space, check ceiling height and swing clearance for every golfer in the household, and plan lighting and acoustics. You get a 3D design and a fixed price, and you approve both before any work starts.

  • In-home design consultation
  • 3D renderings and room modeling
  • Launch monitor selection across all major brands
  • Fixed, transparent pricing

Installation and Project Coordination

Our team installs the impact screen, enclosure, turf, projector, launch monitor, low-voltage wiring and AV. When the room needs framing, electrical or HVAC work, we coordinate it with your builder. If you don't have one, we bring in local trades we trust and manage them through the job.

  • Simulator, AV and low-voltage installation
  • Builder and trade coordination
  • Projector alignment and screen tensioning
  • Launch monitor calibration

Smart Home Integration

Boston Golf Simulators is a division of Boston Automations, so we can tie the simulator into Control4, Savant and Lutron systems. One button can dim the lights, set the temperature and start the simulator software.

  • Control4, Savant and Lutron integration
  • Lighting scenes for play and for entertaining
  • Distributed audio and video
  • One app for the whole room

Managed Service and Support

A simulator is a computer, a projector, a set of sensors and a stack of software. We look after all of it with remote monitoring, software updates, seasonal recalibration and priority on-site service. Commercial clients get service terms written into the contract.

  • Remote monitoring and proactive updates
  • Priority on-site service
  • Seasonal recalibration
  • Booking-system support for venues

Process

How a Simulator Project Works

Every project follows the same seven steps, whether it is a single garage bay or a multi-bay venue.

  1. 01

    Consultation

    Tell us about the room and how you plan to use it. Photos and rough dimensions are enough to start, and we reply within one business day.

  2. 02

    Site visit and measurement

    We laser-measure the room, check ceiling height, width, depth and the hitting position, and look at power, network and ventilation.

  3. 03

    Design and fixed price

    You get a 3D design showing the screen, enclosure, turf, seating and lighting, along with a launch monitor recommendation and one fixed price.

  4. 04

    Room preparation

    If the room needs construction, electrical or HVAC work, that happens first. We coordinate the trades so the room is ready on the day our crew arrives.

  5. 05

    Installation and calibration

    We hang and tension the screen, mount and align the projector, install and calibrate the launch monitor, and set up the software and any smart home control.

  6. 06

    Training and handoff

    We walk everyone in the house through starting a session, choosing a course, practice modes and what to do if something looks off.

  7. 07

    Ongoing service

    After handoff we handle software updates, recalibration and repairs, so the room keeps playing the way it did on day one.

What's Included

What Comes With an Installation

A complete installation covers the equipment and the labor to make it play well. The list below is typical for a home simulator room.

  • Room measurement and swing-clearance check
  • 3D room design
  • Launch monitor and simulator software
  • Impact screen and enclosure
  • Projector, mount and alignment
  • Hitting mat and turf
  • Gaming PC or simulator computer setup
  • Low-voltage wiring and network
  • Lighting, audio and control integration
  • Calibration and household training

Room Requirements

How Much Space Does a Golf Simulator Need?

Most installations need at least a 10-foot ceiling, a 12-foot width and 16 to 18 feet of depth. Ceiling height matters most, because the tallest golfer in the house has to swing a driver without touching it. Width decides whether left- and right-handed players can share the hitting position. Depth leaves room for the ball to travel to the screen and for the launch monitor to sit where it reads best.

Tighter rooms can often still work. An overhead launch monitor such as the Foresight Falcon keeps the floor clear, and a Murphy simulator folds away when the room is needed for something else.

Timeline

How Long Does Installation Take?

After you approve the design, most home installations take 2 to 5 days on site. Rooms that need framing, electrical or HVAC work, a custom hitting bay or a full theater build usually take 4 to 12 weeks. Equipment lead times vary by brand.

FAQ

Golf Simulator Installation Questions

What does a golf simulator installation include?

Our installations include the room measurement and design, the launch monitor and software, the impact screen and enclosure, the projector and its alignment, turf and hitting mat, the computer, low-voltage wiring, calibration and training. Lighting, audio and smart home control are added when the project calls for them.

How much does a golf simulator installation cost?

Complete installations typically range from about $25,000 for a high-performance SkyTrak bay to $150,000 or more for a flagship Golfzon or TrackMan room with custom millwork, lighting and audio. You get one fixed price after the design is done.

How long does a golf simulator installation take?

Once the design is approved, most residential installations take 2 to 5 days on site. Projects that need construction, a custom hitting bay or a full theater build usually run 4 to 12 weeks.

Do I need my own contractor?

No. We handle everything that is part of the simulator. If the room needs framing, electrical or HVAC work, we coordinate with your builder, or we bring in local trades we trust and manage them for you.

How do I know if my room is big enough?

Send us the room's ceiling height, width and depth and a few photos through the design consultation form. We reply within one business day, and if the room looks workable we confirm it with a laser measurement on site.

Do you service simulators after installation?

Yes. Managed service covers remote monitoring, software updates, seasonal recalibration and priority on-site visits. Commercial clients get service terms written into their contract.

Keep Reading

Let's Design Your Room

Schedule a design consultation. We'll measure, model, and price your simulator, and handle every detail from there.